load controllers up to 200 amps form x magnetic la tching contact arrangement ........................... spst (1 form x) weight ............................................................... 15 oz max. contact ratings (note 1): resistive .................. up to 200 amps @ 28 vdc or 115/208v 400 hz ind uctive .......... 60% of rated resistive @ 28 vdc or 115/208v 400 hz motor ............... 40% of rated resistive @ 28 vdc or 115/208v 400 hz lamp ............... 15% of rated resistive @ 28 vdc or 115/208v 400 hz life ...................... 50,000 cycles @ rated resistive load 25,000 cycles @ rated motor l oad 100,000 cycles mechanical coil data: (@ 28 vdc and 25 o c) nominal coil voltage .......................... 28 to 32 vdc latch/reset voltage (@ 71 o c) ............ 18 vdc max coil resistance .......................................... 10 ohms rupture ...................................................... 3600 amperes response time: ............................................. 12 ms nom. contact bounce time ....................................... 2 ms max @ rated con tact load contact voltage drop : initial ...................................... 225 mv @ rated current end of life ............................. 250 mv @ rated current temperature range ................................. - 54 o c to +71 o c vibration (note 2) .............................. 10 g's 50 - 2000 hz shock (operating) (note 2) ......................... 25 g's 11 ms acceleration ............................................................... 15 g duty cycle ........................................................ continuous insulation resistance ............................... 100 megohms @ 500v 25 o c dielectric strength: sea level: contact to case ................................... 1,500 vrms contact to coil ..................................... 1,500 vrms coil to case ......................................... 1,500 vrms across open contacts ........................ 1,350 vrms 50,000 feet: all points ................................................. 500 v rms n otes 1. for other ratings or calibrations consult the factory. 2. for applications requiring higher shock and vibration, consult the factory. 700 lc series load controllers up to 200 amps ? form x magnetic latching s pecifications general performance environmental electrical characteristics 1 www.microsemi.com ? 2015 microsemi corporation april 2015 rev. 3 downloaded from: http:///
the 700lc load controllers are designed to handle even the toughest loads with exceptional current s pike handling characteristics. the contact system utilizes the proven design in our rpc curr ent sensors. the magnetic latching motor is designed to minimize power consumption. the 700lc contact system can handle up to 3,600 amperes of rupture current without any problem. the 700lc can withstand the rigors of even the noisiest of supply volta ges. utilizing all space age approved materials, the 700lc load controllers are ideal for demanding applications. load controller type nominal current rating 700lc - 100 ? unless otherwise specified, all test s made at nominal coil voltages, @ 25 o c. ? for special coil variations, switching configurations, terminals styles and mounting types, consult thefactory. ? unless otherwise specified, tolerances on decimal dimensions are .01 0". ? specifications contained herein are subject to change without notice. catalog number continuous ampere contact rating thread "b" dimension "a" 700lc - 5 5 10 - 32 unf .500 700lc - 7.5 7.5 10 - 32 unf .500 700lc - 10 10 10 - 32 unf .500 700lc - 15 15 10 - 32 unf .500 700lc - 20 20 10 - 32 unf .500 700lc - 25 25 10 - 32 unf .500 700lc - 35 35 1/4 - 28 unf .610 700lc - 40 40 1/4 - 28 unf .610 700lc - 50 50 1/4 - 28 unf .610 700lc - 60 60 1/4 - 28 unf .610 700lc - 75 75 1/4 - 28 unf .610 700lc - 100 100 1/4 - 28 unf .610 700lc - 125 125 1/4 - 28 unf .610 700lc - 150 150 1/4 - 28 unf .610 700lc - 175 175 1/4 - 28 unf .610 700lc - 200 200 1/4 - 28 unf .610 overall dimensions selection table schematic t y pical w iring diagram general notes 2 downloaded from: http:///
700lc - 03 / 0 4 .15 microsemi corporate headquarters one enterprise, aliso viejo, ca 92656 usa within the usa : +1 (800) 713-4113 outside the usa : +1 (949) 380-6100 sales : +1 (949) 380-6136 fax : +1 (949) 215-4996 e-mail: sales.support@microsemi.com microsemi corporation (nasdaq: mscc) offers a comprehensive portfolio of semiconductor and system solutions for comm unications, defense & securi ty, aerospace and industrial markets. products include high-performance and radiation-hardened analog mixed-signal integrated circuits, fpgas, socs and asi cs; power management products; timing and synchronization devices and precise time soluti ons, setting the worlds standard for time; voice processing devices; rf solutions; discrete components; security technologies and scalable anti-tamper products; power-over-ethernet ic s and midspans; as well as custom design capabilities and services. microsemi is head quartered in aliso viejo, calif., and has approximately 3,400 employees globally. learn more at www.microsemi.com . ? 201 5 microsemi corporation. all rights reserved. microsemi and the microsemi logo are trademarks of microsemi corporation. all other trademarks and service marks are the property of their respective owners. microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. the products sold hereunder and any other products sold by microsem i have been subject to li mited testing and should not be used in conjunction with missi on-critical equipment or applications. any performance specifications are believed to be reliable but are not verified, and buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. buyer shall not rely on any data and performance specifications or para meters provided by micr osemi. it is the buyer's responsibility to independently determine suitability of any products and to test and verify the same. the information provided by microsemi hereunder is provi ded "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the buyer. microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other ip rights, whether with regard to such information itself or anything described by such in formation. information provided in this document is proprietary to microsemi, and microsemi reserves the ri ght to make any changes to the information in this document or to any products and services at any time without notice. downloaded from: http:///
|
